Frequently Asked Questions

Useful answers to frequently questions



A: Zorba starts at 6 watt and reaches 22 watt.

A: When the battery reaches to the point where they can't give volt for a desirable watt the green led blinks slowly and steadily, showing us that we need to replace our battery with a charged one.

A: By pressing 3 times the mod button.the bicolor LED starts blinking indicating that the device in entering setting menu.
The number of BLUE flashes indicates the current power(WATTS),following this, the number of RED led flashes indicates the desire power.
The desire power is set by simply releasing the button.
 <See video>.

A: Zorbas includes 2 years warranty.

Blue idicates

fast blinking :Display absence atomizer.

slow blinking :Low Battery

prolonged blinking :low resistance
   

Red indicates

fast blinking :shorted atomizer

slow blinking :high temperature

Adjustments of Zorbas

By pressing 3 times the mod button.the bicolor LED starts blinking indicating that the device in entering setting menu
The number of BLUE flashes indicates the current power(WATTS),following this, the number of RED led flashes indicates the desire power.
The desire power is set by simply releasing the button.


 

A: The reason that was enters the Zorbas on menu with one touch of the switch is because mechanical mod compartment does not make good contact with negative pole.

In this case check out the  switch contacts of the mod compartment and clean if is necessary.

Facebook

Twitter